| View Thread | Return to Index | Read Prev Msg | Read Next Msg |

ANTIQUE FURNITURE RESTORATION DISCUSSION BOARD

Re: Hardware for pocket doors

Posted By: James Schooley <jschooleyfamily@earthlink.net> (0-1pool246-189.nas2.sioux-city1.ia.us.da.qwest.net)
Date: 1/17/4 01:19

In Response To: Hardware for pocket doors (Tim)

If you have the room to start from scratch you may be able to use the track and rollers that are made for barn door arangements. I may be wrong but to my knoledge the original setup you need is no longer being made. As for adjustments to the travler, you may be able to reach them by removing the side trim boards that close in the right and left sides of the door. A ratchet with a screw driver tip may be of some help in getting around the corner to twist the adjusting screws.

Messages in This Thread

| View Thread | Return to Index | Read Prev Msg | Read Next Msg |

ANTIQUE FURNITURE RESTORATION DISCUSSION BOARD is maintained by Administrator with WebBBS 3.21.