| | View Thread | Return to Index | Read Prev Msg | Read Next Msg | |
|---|
ANTIQUE FURNITURE RESTORATION DISCUSSION BOARD
Posted By: Roger DeMuth <fero@sbcglobal.net> (adsl-68-72-214-206.dsl.akrnoh.ameritech.net)
In Response To: Re: Mahogany veneer (James Schooley)
Date: 2/10/5 14:40
Val, There are so many methods of repairs, but there isnt just one way to do anything. James is right on his method of repairing loose veneer, but I use a different method - or rather a different glue. Quite often if the veneer is loose in one place it is loose all the way across, or nearly so. In this case I slip a knife blade under the loose veneer and gently run it across the bottom. Any veneer that is about to come loose will show up. I don't use hide glue however, or for that matter any of the white or yellow glues, as they are kind of thick going on. On very small areas I use super glue, which is very thin and will drip down quicker. Then I run the blade along under the veneer to spread it out. The C clamp and block works fine but for a long area of repair, I use a piece of scap wood the length of the area, then use a bazzilion spring clamps to hold it. Of course use the wax paper-the last thing you want is to glue your glue block to the veneer!
As to replacing the veneer if it is to badly damaged, James left out one important detail. Sorry James. That is where on earth to buy mahogany veneer! I live in a large city but have yet to find a local outlet for veneer other than oak or birch. Do a search for Woodcraft.com. They have many stores nationwide and you can order through their on line catalog. They sell small amounts of veneer, or you can buy a sample pack. i am lucky enough to have a Woodcraft store about 45 minutes from me in Cleveland. Good luck.
| | View Thread | Return to Index | Read Prev Msg | Read Next Msg | |
|---|
ANTIQUE FURNITURE RESTORATION DISCUSSION BOARD is maintained by Administrator with WebBBS 3.21.