| | Return to Index | Read Prev Msg | Read Next Msg | |
|---|
ANTIQUE FURNITURE RESTORATION DISCUSSION BOARD
Posted By: Charolette <rjrivera51@earthlink.net> (dialup-4.231.86.207.Dial1.Houston1.Level3.net)
Date: 11/5/5 19:23
I used Carpenters white glue to reglue a chair after refinishing it. Within a week of beginning to use it, all of the joints had loosened. I took it back apart, and began by putting water down into a dowel hole to soften up the glue so I could remove it. Much to my surprise, the glue had completely dissolved within 2 - 3 minutes. I then began to put water on each of the dowels, and the glue would dissolve and I could just wipe it right off. What went wrong? I thought that the recommended glue was the white rather than the yellow titebond.
| | Return to Index | Read Prev Msg | Read Next Msg | |
|---|
ANTIQUE FURNITURE RESTORATION DISCUSSION BOARD is maintained by Administrator with WebBBS 3.21.