ANTIQUE FURNITURE RESTORATION DISCUSSION BOARD

Re: platform rockers

Posted By: Mark Pheatt <apeconsulting@accessbee.com> (66-42-54-21.lsan.mdsg-pacwest.com)
Date: 5/4/4 19:59

In Response To: Re: platform rockers (James Schooley)

I have a platform rocker that requires a special rocker spring . I am looking for 2 large springs to support the rocker. one on either side of the rocker. the springs resemble large clock springs. the wound spring is made of 9/16 diameter bar that is wound in to a clock spring like fashion, fired and tensioned in to spring steel. the diameter of the spring is approximately 14 inches in diameter. the spring is attached to the platform and to th e rocker with clamps. I any one is interested i can email you a JPEG photo for understanding how it is assembled. thank you

Messages in This Thread

• platform rockers
  ampfeiffer (cache-dr04.proxy.aol.com) -- 1/9/4 20:47
  • Re: platform rockers
    James Schooley (0-1pool246-83.nas2.sioux-city1.ia.us.da.qwest.net) -- 1/9/4 22:42
    • Re: platform rockers
      mark pheatt (66-42-54-18.lsan.mdsg-pacwest.com) -- 4/1/4 19:58
    • Re: platform rockers
      Mark Pheatt (66-42-54-21.lsan.mdsg-pacwest.com) -- 5/4/4 19:59
  • Re: platform rockers
    Mary E. Brown (c-24-12-78-205.client.comcast.net) -- 2/12/4 19:04
    • Re: platform rockers
      RuthieJo (fl-psl2c3-11.stu.adelphia.net) -- 5/13/4 16:04
    • Re: platform rockers
      Paula Wolke (68-118-40-108.dhcp.gnps.or.charter.com) -- 8/1/5 16:43
      • Re: platform rockers
        James Schooley (0-1pool247-73.nas2.sioux-city1.ia.us.da.qwest.net) -- 8/1/5 22:31

ANTIQUE FURNITURE RESTORATION DISCUSSION BOARD is maintained by Administrator with WebBBS 3.21.