ANTIQUE FURNITURE RESTORATION DISCUSSION BOARD

Re:Touching polyurethane with lacquer?

Posted By: James Schooley (0-1pool247-236.nas2.sioux-city1.ia.us.da.qwest.net)
Date: 12/27/3 18:16

In Response To: Re:Touching polyurethane with lacquer? (Doyle)

I think the poly over lacquer is the main problem, since once poly cures it is very impervious to even stripper. The chair most certainly has a lacquer if it came from a factory since lacquer is about all the use. A sealer of spray shellac will prevent the effect too.

Messages in This Thread

• dents and scratches in new wood finish
  Doyle (cache-dr04.proxy.aol.com) -- 12/25/3 16:49
  • Re: dents and scratches in new wood finish
    Jim Cole (209-102-128-140.dialup.gulftelephone.net) -- 12/26/3 08:43
    • Re: dents and scratches in new wood finish
      Doyle (cache-dr04.proxy.aol.com) -- 12/26/3 12:18
      • Re: dents and scratches in new wood finish
        James Schooley (0-1pool246-112.nas2.sioux-city1.ia.us.da.qwest.net) -- 12/26/3 22:58
        • Re:Touching polyurethane with lacquer?
          Doyle (cache-mtc-al08.proxy.aol.com) -- 12/26/3 23:42
          • Re:Touching polyurethane with lacquer?
            James Schooley (0-1pool247-236.nas2.sioux-city1.ia.us.da.qwest.net) -- 12/27/3 18:16
            • Re: Seal coat constraints-
              Doyle (cache-rq01.proxy.aol.com) -- 12/27/3 20:49
    • DENTS IN NEW WOOD TOP
      John Branigan (131.158.65.22) -- 12/30/3 12:57

ANTIQUE FURNITURE RESTORATION DISCUSSION BOARD is maintained by Administrator with WebBBS 3.21.