| | View Thread | Return to Index | Read Prev Msg | Read Next Msg | |
|---|
ANTIQUE FURNITURE RESTORATION DISCUSSION BOARD
Posted By: EJ Powers <healthypa@aol.com> (cache-mtc-al08.proxy.aol.com)
In Response To: Storkline Baby Bed (Darnita Henry)
Date: 11/25/3 08:22
Hi -- can only empathize -- we too just got our old Storkline out of a basement - we bought it in 1965 --------- we have the spring and the four sides -- the spring "hangs" on the two end pieces with four bent wire pieces. Each piece is actually a bent wire hanger - a "hook" that goes over the metal tag on the end piece and a "male" part that goes into the hole on the meatl rod on the spring...... you may be ablt to make the hooks by bending small diameter metal rods -- if you are interseted, I can try to get you a picture of teh hangers - without them you'll have trouble "hanging " the spring on the ends. Our Storkline crib is missing two of the round plastic threaded pieces that tighten the sides on the long round metal rods ---------------- can't find a source for them either - kinda resolved to looking at gadrage sales ------ Good luck -- E J
| | View Thread | Return to Index | Read Prev Msg | Read Next Msg | |
|---|
ANTIQUE FURNITURE RESTORATION DISCUSSION BOARD is maintained by Administrator with WebBBS 3.21.