| View Thread | Return to Index | Read Prev Msg | Read Next Msg |

ANTIQUE FURNITURE RESTORATION DISCUSSION BOARD

Re: need tension spring

Posted By: James Schooley <furnitureissues@earthlink.net> (0-1pool246-19.nas2.sioux-city1.ia.us.da.qwest.net)
Date: 6/5/5 01:11

In Response To: need tension spring (bob brown)

I have replaced these springs with used valve springs from a V8 engine. As long as you switch them both, so they are equal, they should work fine. You may have to grind them down a little or pick through a few for a good fit, but it's worth a try.

Messages in This Thread

| View Thread | Return to Index | Read Prev Msg | Read Next Msg |

ANTIQUE FURNITURE RESTORATION DISCUSSION BOARD is maintained by Administrator with WebBBS 3.21.