ANTIQUE FURNITURE RESTORATION DISCUSSION BOARD

Re: Using Oxalic Acid

Posted By: Greg Scholl <beatkat@adelphia.net> (67-22-200-210.albyny.adelphia.net)
Date: 4/7/5 15:23

In Response To: Re: Using Oxalic Acid (James Schooley)

Andrew, how many square feet are you talking about treating...is it just spot treating ...or are you wanting to treat the whole roof and all the timbers? This may not be an easy job, typically you have to saturate the area with a warm solution....overhead this will be difficult...you'll probably be better off covering the plywood with a thin layer of clean wood...be it plywood, t&g, paneling, or whatever.. and just treating the timbers....but depending on how bad the stains are and how deep....the results will be mixed.Pick an out of the way spot and experimant...

Messages in This Thread

• Using Oxalic Acid
  Todd Broich (4.2.170.194) -- 10/28/3 16:26
  • Re: Using Oxalic Acid
    Jim Cole (209-102-128-17.dialup.gulftelephone.net) -- 10/28/3 18:50
    • Re: Using Oxalic Acid
      Andrew Page (64.220.125.130.ptr.us.xo.net) -- 4/6/5 13:24
      • Re: Using Oxalic Acid
        James Schooley (0-1pool246-124.nas2.sioux-city1.ia.us.da.qwest.net) -- 4/7/5 10:22
        • Re: Using Oxalic Acid
          Greg Scholl (67-22-200-210.albyny.adelphia.net) -- 4/7/5 15:23
  • Re: Using Oxalic Acid
    Don Shaeffer (user-0cej6eh.cable.mindspring.com) -- 4/17/4 07:00
    • Re: Using Oxalic Acid
      James Schooley (0-1pool246-82.nas2.sioux-city1.ia.us.da.qwest.net) -- 4/7/5 22:05

ANTIQUE FURNITURE RESTORATION DISCUSSION BOARD is maintained by Administrator with WebBBS 3.21.