| View Thread | Return to Index | Read Prev Msg | Read Next Msg |

ANTIQUE FURNITURE RESTORATION DISCUSSION BOARD

Re: Repairing Light Pine

Posted By: Jim Cole (209-102-128-219.dialup.gulftelephone.net)
Date: 11/3/3 09:21

In Response To: Repairing Light Pine (Charlie)

You might try steaming the dings. Use a needle to punch holes in the finish then fill the ding with water adn heat with a soldering iron do not touch the water with the iron. It maght tiake several treatments to get the dings out. The finish will have to be repaired after it dries thoroughly.

Messages in This Thread

| View Thread | Return to Index | Read Prev Msg | Read Next Msg |

ANTIQUE FURNITURE RESTORATION DISCUSSION BOARD is maintained by Administrator with WebBBS 3.21.