| View Thread | Return to Index | Read Prev Msg | Read Next Msg |

ANTIQUE FURNITURE RESTORATION DISCUSSION BOARD

Re: duncan phyfe style dining room table

Posted By: Jim Cole (209-102-131-44.dialup.gulftelephone.net)
Date: 4/15/3 15:17

In Response To: duncan phyfe style dining room table (M. Normi)

1. Remove old finish with a good grade of stripper. @. Fill any daaged areas with new veneer or wood filler if the areas are small. 3. Stain with a dark mahagonay stain. 4. Apply a sealer coat of clear gloss lacquer. %. Paste fill table top. 6. Apply 6-12 coats of clear gloss 3 coats at a tiem allowing 3 days drying time between sparay sessions. Sand top qwith 360 lightly to remove any nibs or rough spots every 3rd coat. Cohntiue until grain is full. 7.Sand with 600, 800, 1000 grith wet dry using water as a lube. 8 Compund top with Meguire's step 1, 2, 3. 9. Enjoy

Messages in This Thread

| View Thread | Return to Index | Read Prev Msg | Read Next Msg |

ANTIQUE FURNITURE RESTORATION DISCUSSION BOARD is maintained by Administrator with WebBBS 3.21.