| View Thread | Return to Index | Read Prev Msg | Read Next Msg |

ANTIQUE FURNITURE RESTORATION DISCUSSION BOARD

Re: Veneer classic car dash

Posted By: Jim Cole (64-40-66-27.dialup.mebtel.net)
Date: 1/31/2 08:02

In Response To: Veneer classic car dash (Michael Shewan)

Is the dash metal or wood? If it's wood after thoroughly cleaning any reside sand with 220 grit. Apply a light eve coat of glue like Titebond II to both the veneer and the dash let dry then iron the veneer on with and iron set about medium. You may also need to wet the veneer outer survface to help bend aroung the dash. If the dash is metal a good grade of contact cement applied in the same manor is the best way to go.

Messages in This Thread

| View Thread | Return to Index | Read Prev Msg | Read Next Msg |

ANTIQUE FURNITURE RESTORATION DISCUSSION BOARD is maintained by Administrator with WebBBS 3.21.