| View Thread | Return to Index | Read Prev Msg | Read Next Msg |

ANTIQUE FURNITURE RESTORATION DISCUSSION BOARD

Re: roll-top desk

Posted By: Paul Staniforth <esme-paul@esme-paul.demon.uk> (esme-paul.demon.co.uk)
Date: 1/13/2 14:54

In Response To: roll-top desk (Cal Stoltenberg)

Hi Cal

Roll top desk removal, not mentioned by Jim is quite easy. Somewhere usually at the back of the piece of furniture you will find two slots one either side of the cabinet through which the original intact roll-top was fed into the piece of furniture. I suggest you remove your top the way it was put in and replace it the same route. Good luck.

Messages in This Thread

| View Thread | Return to Index | Read Prev Msg | Read Next Msg |

ANTIQUE FURNITURE RESTORATION DISCUSSION BOARD is maintained by Administrator with WebBBS 3.21.