| View Thread | Return to Index | Read Prev Msg | Read Next Msg |

ANTIQUE FURNITURE RESTORATION DISCUSSION BOARD

SUPPORTED pocket door track

Posted By: Mark Robinson <JavaMark5561@Yahoo.com> (sunproxy.cnrf.navy.mil)
Date: 11/18/1 14:01

I discovered beutiful pocket doors after I bought my home, however, they are not suspended from an overhead track but SUPPORTED from below. I can feel the wheel mechanism as I move the doors and found a 2" section of cast iron track as I cleaned out in the pocket. I'm trying to find replacement track to make the doors fully funtional again. The track was about 2" wide with a raised round center section about 1/2" wide and 1/4" up that the wheels road on. The sides tapered from the center to the edges and had counter-sunk holes in them to secure the track to the floor. If anyone can point me to a supplier or re-manufaturer (or somebody) where I can obtain replacements I'd be very appreciative.

Messages in This Thread

| View Thread | Return to Index | Read Prev Msg | Read Next Msg |

ANTIQUE FURNITURE RESTORATION DISCUSSION BOARD is maintained by Administrator with WebBBS 3.21.