| View Thread | Return to Index | Read Prev Msg | Read Next Msg |

ANTIQUE FURNITURE RESTORATION DISCUSSION BOARD

Re: Old Roll Top Desk

Posted By: Greg Scholl <beatkat@adelphia.net> (67-22-200-210.albyny.adelphia.net)
Date: 9/8/5 13:46

In Response To: Re: Old Roll Top Desk (James Schooley)

If you elect to have someone cut you a sheet...make sure you stress what it's for and that you need an accurate cut with zero tear out......when gluing trim around something like this you need to have a smooth cut with clean sharp edges! The typical home center or supply house will use the panel saw with whatever blade has been on there for the last 20 months.....this is NOT what you want to crosscut oak ply with...! Finish side goes down when cutting with a sharp ATB or triple chip blade with at least 45 teeth....

Messages in This Thread

| View Thread | Return to Index | Read Prev Msg | Read Next Msg |

ANTIQUE FURNITURE RESTORATION DISCUSSION BOARD is maintained by Administrator with WebBBS 3.21.